Combination Buttons; Operation Guide - Gree GWC09MB-D3DNK Series Owner's Manual

10
Introduction for buttons on remote controller
Note :
● Range of time setting is: 0.5~24h
● The interval between two motions can't exceed 5s, otherwise the
remote controller will exit setting status.
Function introduction for combination buttons
Child lock function
Press "+" and "-" buttons simultaneously can turn on or turn off child lock
function. When child lock function is started up, LOCK indicator on re-
mote controller is ON. If you operate the remote controller, remote
controller won t send signal.
Temperature display switchover function
Under OFF status, press "-" button and "MODE" button simultaneously
can switch between °C and °F.

Operation guide

1. After putting through the power, press "ON/OFF" button on remote
control to turn on the air conditioner.
2. Press "MODE" button to select your required mode: AUTO, COOL,
DRY, FAN, HEAT.
3. Press"+" or"- "button to set your required temperature. (Temperature
can't be adjusted under auto mode).
4. Press "FAN" button to set your required fan speed: auto, low, medium
and high speed.
5. Press "SWING" button to select fan blowing angle.