Introduction For Buttons On Remote Control - Gree GWC09MB-D3DNK Series Owner's Manual

8
Introduction for buttons on remote controller
NOTES :
• This is a general use remote controller, it could be used for the air
conditioners with multifunction; For some function, which the model
doesn't have, if press the corresponding button on the remote controller
that the unit will keep the original running status.
• When power is connected(stand by condition), you can operate the air
conditioner through the remote controller.
• When unit is on, each time you press the button on remote controller,
the sending signal icon "
once. If the air conditioner gives out a beep sound, it means the signal
has been sent.
• When unit is off, set temperature will be displayed on the remote
controller (If the light of indoor unit display is turned on, the correspon-
ding icon will be displayed);
When unit is on, it will display the icon of the on-going function.
1
ON/OFF button
Press this button to turn unit on/off.
2
MODE button
Pressing this button once can select your required mode circularly as
below (the corresponding icon" " will be lit up after the mode is selected):
• When selecting
cally according to ambient temperature. Set temperature can't be
adjusted and won't be displayed either. Press
fan speed.
• When selecting
mode. Then press or
button to adjust fan speed.
• When selecting
speed under dry mode. In dry mode, fan speed can't be adjusted.
• When selecting
only.
Then press
• When selecting heat mode, air conditioner will operate under heat
mode. Then press or
button to adjust fan speed. (Cooling only unit can't receive heating
mode signal. If set
button can't turn on the air conditioner.)
3
/
• Pressing
by 1°F(°C). Hold
control will change quickly.
Release the button after your required set temperature is reached.
• When setting Timer On or Timer Off, press
time. (SeeTIMER Button for setting details)
"on the display of remote controller will blink
Auto Déshumidification
Climatisation
(auto mode), air conditioner will operate automati-
(cool mode), air conditioner will operate under cool
button to adjust set temperature. Press FAN
dry mode, air conditioner will operate at low fan
fan mode, air conditioner will operate in fan mode
FAN button to adjust fan speed.
button to adjust set temperature. Press
HEAT mode by remote controller, press ON/OFF
MODE button
or button once will increase or decrease set temperature
or button for 2s, set temperature on remote
Chauffage
Ventilation
(FAN) button to adjust
or button to adjust the
FAN