Replacement Of Batteries In Remote Control - Gree GWH09UC-D3DNA4A Owner's Manual

17

Replacement of batteries in remote control:

1. Press the back side of remote control marked
with" ", as shown in the fig; and then push out
the cover of battery box along the arrow direction.
2. Replace the two batteries (AAA - 1.5V); make
sure that the batteries are inserted correctly
with the polars '+' and '-' in the right position.
3. Reinstall the cover of battery box.
Battery level will be displayed on the remote
controller.When "
replace the batteries, otherwise, remote
controller can't operate normally.
• During operation, point the remote control signal sender at the
receiving window on the indoor unit.
• The distance between signal sender and receiving window should be no
more than 8m, and there should be no obstacles between them.
• Signal may be interfered easily in the room where there is fluorescent
lamp or wireless telephone; remote control should be close to the indoor
unit during operation.
• When replacing the batteries, make sure you use two identical batteries
(same brand).
• When you don't use the remote control for a long time, please take out
the batteries.
• If the display on the remote control is fuzzy or there's no display, please
replace the batteries.
All manuals and user guides at all-guides.com
" is flickering, please
signal sender
reinstall
remove
Cover of battery box
battery level
battery