Tools For Installation; Selection Of Installation Location - Gree GWC09MB-D3DNK Series Owner's Manual

20

Tools for installation

1 Level meter

Selection of installation location

Installing the unit in the following
places may cause malfunction. If it is
unavoidable, please consult your local
dealer or a certified technician:
1. A place with strong heat sources,
vapors, flammable or explosive gas,
or volatile objects spread in the air.
2. A place with high-frequency
devices (such as welding machine,
medical equipment).
3. A place near coast area.
4. A place with oil or fumes in the air.
5. A place with sulphurous gas.
6. 0ther places with special
environment.
7. The appliance cannot be installed
in a laundry.
1. Select a location where the noise and outflow air emitted by the outdoor unit will
not affect neighborhood.
2. The location should be well ventilated and dry, where the outdoor unit won t
be exposed directly to sunlight or strong wind.
3. The location should be able to withstand the weight of outdoor unit.
4. Make sure that the installation follows the requirement of installation dimension
diagram.
5. Select a location which is out of reach for children and far away from animals or
plants. If it is unavoidable, please add a fence for safety purpose.
2 Screw driver
• Contact your local agent or a certified
technician for installation.
3 Impact drill
1. There should be no obstruction near
air inlet and air outlet.
2. Select a location where the conden-
sation water can be dispersed easily
and won't affect people.
3. Select a location which is convenient
to connect the outdoor unit and the
closest possible to the power supply.
4. Select a location which is out of
reach for children.
5. The location should be able to
withstand the weight of indoor unit
and won't increase noise and
vibration.
6. The appliance must be installed
2.5m above floor.
7. Don't install the indoor unit right
above an electric appliance.
8. Please try your best to keep the unit
away from fluorescent lamps.