Gree GWC09MB-D3DNK Series Owner's Manual page 27

Installation of the indoor unit
Note:
• Pay attention to dust prevention and
take relevant safety measures when
opening the hole.
• The plastic expansion particles are
not provided and should be bought
locally.
Step Four: outlet pipe
1.The pipe can be led out in the
direction of right, rear right, left or
rear left.
Rear right
Right
Step Five: connect the pipe of indoor unit
1.Aim the pipe joint at the corres-
ponding bell mouth.
2.Pretightening the union nut with
hand.
3.Adjust the torque force by referring to the following sheet. Place the
open-end wrench on the pipe joint and place the torque wrench on the
union nut. Tighten the union nut with torque wrench.
Left
Rear left
Indoor
5-10
2. When select leading out the pipe
from left or right, please cut off
the corresponding hole on the
bottom case.
Left
Cut off
the hole
Pipe joint
Outdoor
Right
Union nut Pipe
23