Fan Button - Gree GWC09MB-D3DNK Series Owner's Manual

Introduction for buttons on remote controller
4

FAN button

Pressing this button can select fan speed circularly as: AUTO, SPEED 1
SPEED 2 SPEED 3 SPEED 3
AUTO
Note :
● Under Auto speed, air conditioner will select proper fan speed
automatically according to ambient temperature.
● Fan speed can't be adjusted under Dry mode.
5
SWING button
Press this button to turn on up&down air swing.
6
SLEEP button
Under Cool, Heat and Dry mode, press this button to turn on Sleep function.
Press this button to cancel Sleep function. Under Fan and Auto mode, this
function is unavailable.
7
SLEEP button
●When unit is on, press this button to set Timer Off. T-OFF and H icon will
be blinking. Within 5s, press + or - button to adjust the time for Timer Off.
Pressing + or - button once will increase or decrease the time by 0.5h.
Hold + or - button for 2s, time will change quickly. Release the button after
your required set time is reached. Then press TIMER button to confirm it.
T-OFF and H icon will stop blinking.
●When unit is off, press this button to set Timer On. T-ON and H icon will be
blinking. Within 5s, press + or - button to adjust the time for Timer On.
Pressing + or - button once will increase or decrease the time by 0.5h.
Hold + or - button for 2s, time will change quickly. Release the button after
your required set time is reached. Then press TIMER button to confirm it.
T-ON and H icon will stop blinking.
●Cancel Timer On/Off: If Timer function is set up, press TIMER button once
to review the remaining time. Within 5s, press TIMER button again to
cancel this function.
SPEED 4
9