Table of Contents
Advertisement
ZEUS4-VD
16 CHECKING AND CHANGING OUTPUT STATUS
User can manage outputs with the use of SMS command.
16.1 CHECKING OUTPUT STATUS BY SMS COMMAND
By sending this command to ZEUS4-VD you receive SMS message with all Output status:
;PORC;
Return SMS message is:
;Output 1=(ON-OFF) – status on output 1.
;Output 2=(ON-OFF) – status on output 2.
;Output 3=(ON-OFF) – status on output 3.
;Output 4=(ON-OFF) – status on output 4.
16.2 ORC PARAMETER
This parameter is used to control outputs directly via SMS message.
16.3 OUTPUT REMOTE CONTROL BY SMS COMMAND
By sending this command to ZEUS4-VD the output X is switched ON:
;ORCX=1;
By sending this command to ZEUS4-VD the output X is switched OFF:
;ORCX=0;
If you would like to receive SMS message with the Output status write "+" before SMS command:
;+ORCX=1;
Return SMS message is:
ORCX=(ON)
Table of parameters:
Name
ORC1
ORC2
ORC3
ORC4
Example:
Remote programming by SMS
SMS commad
;ORC1=1;
;ORC2=0;
For X please choose one of the output numbers from 1 to 4.
For X please choose one of the output numbers from 1 to 4.
For X please choose one of the output numbers from 1 to 4.
Where X is one of the output numbers from 1 to 4.
Control of output 1
Control of output 2
Control of output 3
Control of output 4
Table 35: ORC parameters
Activate output 1
Deactivate output 2
Table 36: ORC parameters example
Comment
Description
41
INSTALLATION MANUAL
Advertisement
Table of Contents
