ZEUS4-VD
13 SYSTEM COMMANDS
Next system commands are used to help the user to control the operation of ZEUS4-VD device.
13.1 FACTORY DEFAULT COMMAND (SDCLR)
SDCLR command is used to delete all parameters and SMS on SIM card. After delete process is
completed the system will be restarted. Now ZEUS4-VD will be loaded with factory default
settings (Paragraph 20).
;SDCLR;
13.2 GSM MODULE RESTART (MRES)
MRES command is used to restart GSM module.
;MRES;
13.3 SYSTEM RESTART (SSRES)
SSRES command is used to restart ZEUS4-VD.
;SSRES;
13.4 LOG MEMORY CLEAR (LCLR)
LCLR command is used to manually clear internal memory storage of log.
;LCLR;
13.5 REMOVE ALL CLP USER (CLPCL)
CLPCL command is used to delete all CLIP users (CLP1 – CLP10).
;CLPCL;
38
INSTALLATION MANUAL