Table 17: Od Parameters; Table 18: Od Parameters Example - MARS COMMERCE ZEUS4-VD Installation Manual

ZEUS4-VD
11.2.8 OD parameters
OD parameters are used to link alarm events directly to output. OD1 to OD4 are used to link input
events to output, other are used for internal function notification.
Table of parameters:
Name
OD1
OD2
OD3
OD4
OD6
OD7
OD8
OD9
OD10
OD11
Example:
 Direct programming on the SIM card
Name
OD1
OD2
OD6
OD7
OD8
 Remote programming by SMS
;OD1=1;OD2=0;OD6=2;OD7=4;OD8=3;
11.2.9 IT, AR and IB parameters
With these parameters user define the number of alarm events that can be triggered in chosen
interval before the systems goes in bypass mode (blocks sending alarm events to telephone
numbers).
IT – parameter defines the interval (in seconds) in which maximum AR number of alarm can be
triggered.
Input 1 direct link to output
Input 2 direct link to output
Input 3 direct link to output
Input 4 direct link to output
GSM network error
System tamper
System ON/OFF
Unauthorized call/SMS
Listen in indication
CID transfer error

Table 17: OD parameters

ZEUS4-VD PROGRAMMING TABLE
SIM CARD PHONE BOOK
Number
1 Alarm on IN1 trigger output 1
0 No direct connection between input2 and output
2 GSM network failure on output 2
4 System tamper on output 4
3 System ON/OFF on output 3

Table 18: OD parameters example

Comment
Description
19
INSTALLATION MANUAL