Table 22: Zeus4-Vd Dtmf Commands - MARS COMMERCE ZEUS4-VD Installation Manual

ZEUS4-VD
11.2.11 DTMF REMOTE COMMANDS
When ZEUS4-VD enters VOICE call user has the option to control device via DTMF command. By
default this DTMF control is limited to canceling the ongoing and all next call.
The user receives a confirmation of most DTMF commands via DTMF feedback pattern 1 or 3
beeps.
REMOTE COMMAND
00
01
10
11
12
20
21
22
30
31
32
40
41
42
51
52
53
54
99
90
*
#
ACTION DESCRIPTION
All outputs OFF (3 beeps=OFF)
All outputs ON (1 beep=ON)
Output 1 OFF (3 beeps=OFF)
Output 1 ON (1 beep=ON)
Check the output 1 state (1 beep=ON, 3 beeps=OFF)
Output 2 OFF (3 beeps=OFF)
Output 2 ON (1 beep=ON)
Check the output 2 state (1 beep=ON, 3 beeps=OFF)
Output 3 OFF (3 beeps=OFF)
Output 3 ON (1 beep=ON)
Check the output3 state (1 beep=ON, 3 beeps=OFF)
Output 4 OFF(3 beeps=OFF)
Output 4 ON (1 beep=ON)
Check the output4 state (1 beep=ON, 3 beeps=OFF)
Input 1 status checking (1 beep=alarm, 3 beeps=normal)
Input 2 status checking (1 beep=alarm, 3 beeps=normal)
Input 3 status checking (1 beep=alarm, 3 beeps=normal)
Input 4 status checking (1 beep=alarm, 3 beeps=normal)
Listen-in ON
Listen-in OFF
Does not call this telephone number again
Complete interruption of the dialing procedure

Table 22: ZEUS4-VD DTMF commands

22
INSTALLATION MANUAL