Eneo VKC-1341A/12-24 Installation And Operating Instructions Manual page 44

• SHARPNESS
The outline of the video image becomes cleaner and more distinctive as the level of
SHARPNESS increases. If the level goes up excessively, however, it may affect the video
image and generate noise.
• LEVEL
Adjust the SHARPNESS of the screen by using the
• END
RETURN to SPECIAL MENU
• MIRROR
ON: Sets a horizontal image inversion
OFF: Cancels the inversion
• SYNC
Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL LINE-LOCK. In
LINE-LOCK mode, it synchronizes the video signal between cameras without a synchronous
generator.
• INT
This mode is necessary for using the internal synchronization.
• LL (synchronisation with the mains phase, during AC operation)
When using more than one camera, this mode can be used to synchronise all the cameras
with the same mains phase.
• LEVEL
• END
NOTE: When using a 12 V DC supply, operation in line lock mode is not possible.
• PRIVACY
Conceals the areas you do not wish to appear on the screen.
• OFF: Cancels the PRIVACY mode
• ON: Operates the PRIVACY mode. To adjust PRIVACY MASK, press „ENTER" button.
• AREA SEL
• AREA STATE Select „ON" to display the selected AREA, and select „OFF" to conceal the
• AREA TONE
• TOP
• DOWN
Sync phase is adjustable in line lock mode 0 ~ 359
RETURN to SPECIAL MENU
Select the AREA you want to adjust.
selected AREA.
Adjust the tone of the selected AREA.  ~ 00
Adjust the TOP of the selected AREA by using the
Adjust the DOWN of the selected AREA by using the
or
44
button. 0 ~ 3
or button.
or button.