5.1 WB
Press the MENU button to access the „WB" mode.
• MODE
• ATW (Auto Tracking White Balance)
This mode can be used within the colour temperature range ,800K ~ 0,500K
• AWC
(Auto White Balance Control)
Please press the MENU button while the camera is directed at a piece of white paper to
obtain the optimum state under current illumination. If the environment including the light
source is changed, you have to adjust the white balance again.
• MANUAL
The manual adjustment mode enables finer adjustment. You can adjust the RED and BLUE
colour values while monitoring the colour changes on the object at the „RED" or „BLUE"
menu. The „R GAIN" and „B GAIN" is available only at the MANUAL mode.
NOTE: Under the following conditions the WHITE BALANCE function may not operate
properly. In such cases, please select the AWC mode.
• When the object's surroundings have a very high colour temperature.
(eg. A clear sky and sunset)
• When the object's surroundings are dark
• If the camera directly faces a fluorescent light or is installed in a place where
there are considerable changes in illumination, the WHITE BALANCE function
may become unstable.
WHITE BAL.
MODE
ATW / AWC
RED
|--------|--------|
BLUE
|--------|--------|
EXIT
/ MANUAL
0 ~ 00 (32)
0 ~ 00 (38)
36
Default settings:
bold