Eneo VKC-1341A/12-24 Installation And Operating Instructions Manual page 39

• MODE
• AUTO
Auto control of the shutter speed can be achieved. When AUTO mode is on, the speed is
controlled automatically according to the brightness of the screen.
• BRIGHTNESS
• END
• SHUTTER
The shutter speed can be controlled manually. X8 ~ /0,000
• FLK
Please select „FLK" mode when flickering occurs on the screen, due to an imbalance
between illumination and frequency. /0 sec.
NOTE: • When selecting DC/VIDEO lens, you can choose „FLK" or „1/50".
The „FLK" functions FLICKLESS OFF and the „1/50" functions E/I OFF.
• While using the internal system, if the shutter setting is on „AUTO" and the
camera is directly facing a bright fluorescent light, the image on the screen can
be adversely affected. Therefore please choose the installation location with care.
• When „SHUTTER" mode is on, the SENS UP function does not operate.
• AGC (Auto Gain Control)
Adjust the AGC GAIN to the desired mode by using the
increases, the screen gets brighter and the level of noise also increases.
•
HIGH / MIDDLE / LOW / OFF
• BRIGHTNESS
• END
• LENS
Automatic control of the brightness level through the intensity of radiation.
• MANUAL
Available by using manual lens
• DC
• LEVEL
• END
• VIDEO
Adjust the „BRIGHTNESS" to the desired LEVEL by using the
button.
RETURN to AE MENU
Adjust the „BRIGHTNESS" to the desired LEVEL by using the
button.  ~ 70
RETURN to AE MENU
Adjust the brightness level by pressing the
DC's submenu. Level setting is available only by using the DC IRIS lens.
Then put the A/I LENS selection switch on the side of the camera in the
„DC" position.
RETURN to the AE MENU
or
39
or
button. As the level of gain
or
or button at the