Cam Set - Eneo VKC-1341A/12-24 Installation And Operating Instructions Manual

5.4 CAM SET

Press the MENU button to access the „CAM SET" mode.
• TITLE
Select the camera TITLE that may be composed of letters, numbers, special texts, or a
combination of these up to 5 digits.
Move to left
Move to right
CLR
Erase all character
POS
Change the position of the title (If you want to change the position of the title, press
ENTER button at the POS. Find the position you wish to display the title by using the
4 directional buttons, and then press the ENTER button.)
END
End
NOTE: If the wrong name has been input:
If you press the ENTER button after moving the cursor the CLR, all the letters will
be erased. If you want to correct a letter, please move the cursor to the arrow at
the bottom left of the screen and press „ENTER". Please position the cursor above
the letter you wish to correct, and then move the cursor onto the letter you wish to
choose and press the ENTER button.
• DISPLAY
ON: Display TITLE in the monitor.
OFF: Disappear TITLE in the monitor.
• DEFAULT
The factory setting of the Camera is selected.
CAM SET
TITLE
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- , 0   3 4 5 6 7 8 9
DISPLAY
ON / OFF
DEFAULT
SAVE
EXIT
C L R P O S E N D
4