JVC UX-QD70S Service Manual page 31

3.3.6 Removing the slide base (L) and slide base (R)
(See fig.11)
• Remove the MD servo control board, mecha cover, head lifter,
head assembly and loading assembly.
(1) Remove the two screws E attaching the slide base (L) and
slide base (R) from upper side of loading assembly.
(2) Take out the slide base (L) and slide base (R)
Reference:
When attach the slide base (L), slide base (L) is attached ac-
cording to fixing point g.
3.3.7 Removing the loading mechanism assembly
(See fig.12)
• Remove the MD servo control board, mecha cover, head lifter,
head assembly and loading assembly.
(1) Remove the bend part h of mecha base from upper surface
of loading assembly.
(2) Pull up and remove take out the loading mechanism as-
sembly.
Slide base (R) Fixing part g
Fixing part g
Bend part h
Loading mechanism assembly
E
Slide base (L)
E
Fig.11
Loading mehca base
Fig.12
(No.MB496)1-31