JVC UX-QD70S Service Manual page 21

3.2.2 Removing the tray assembly
(See fig.3 and 4)
• Remove the DVD cover.
(1) From the right-hand side of a DVD mechanism assembly,
a slide cam is pushed and a tray assembly is pulled out in
the direction of an arrow. (See fig.3)
(2) Remove the two screws B attaching the tray assembly
form the upper surface of a DVD mechanism assembly.
(See fig.4)
(3) Bushing of a tray assembly is removed from the projection
part a of a DVD mechanism, and a tray assembly is re-
moved. (See fig.4)
Tray assembly
Slide cam
Fig.3
B
Projection part a
Projection part a
Fig.4
DVD mechanism assembly
Tray assembly
(No.MB496)1-21