JVC UX-QD70S Service Manual page 18

3.1.20 Removing the DVD mechanism assembly
(See Fig.23)
• Remove the rear cover(B), side panels(L)/(R), top cover as-
sembly, heat sink(B), main board, regulator board, trans
board, CD mechanism bracket and joint board.
(1) From the top side of the main body, remove the screw Z at-
taching the DVD mechanism assembly.
(2) Take out the DVD mechanism assembly from the main
body.
Note:
When removing the DVD mechanism assembly, be careful not
to damage the lower board and parts.
3.1.21 Removing the LCD board
(See Fig.24)
• Remove the rear cover(B), side panels(L)/(R), top cover as-
sembly and front panel assembly.
(1) From the inside of the front panel assembly, remove the
three screws AA attaching the LCD board.
(2) Take out the LCD board from the front panel assembly.
Note:
When attaching the LCD board, be careful not to damage the
LCD panel.
1-18 (No.MB496)
DVD mechanism assembly
Fig.23
AA
Fig.24
Z
LCD board