JVC UX-QD70S Service Manual page 28

3.3.2 Removing the mecha cover
(See fig.3)
(1) Remove the four screws B attaching the mecha cover.
(2) Remove the hook from fixing part c of the internal loading
assembly.
(3) Shift the mecha cover to front side, and then remove to up-
per direction.
3.3.3 Removing the head lifter
(See fig.4 to 6)
(1) Remove the spring from hook d of main body. (See fig.4)
Reference:
• Spring can be removed in the state where it was at-
tached, to head lifter.
• Spring is removed from head lifter if needed.
(2) Shift the head lifter to direction the arrow, and then discon-
nect the fixing part e. (See fig.5)
(3) Remove the spring from the head lifter, and then remove
the head lifter. (See fig.6)
1-28 (No.MB496)
Fixing part c
B
Hook
Fixing part c
Fig.3
Head lifter
Spring
Hook d
Fig.4
Fixing part e
Head lifter
Fig.5
Head lifter
Spring
Fig.6
Mecha cover
B
Spring
Fixing part e