JVC UX-QD70S Service Manual page 22

3.2.3 Removing the LED assembly
(See fig. 5)
• Remove the DVD cover and tray assembly.
(1) From the upper surface of a tray assembly, the double-sid-
ed tape which has attached the LED assembly is removed,
and a LED board is removed.
3.2.4 Removing the traverse mechanism assembly
(See fig.6)
• Remove the DVD cover.
(1) Remove the four screws C attaching the traverse mecha-
nism assembly form bottom surface of the DVD mecha-
nism.
(2) Remove the traverse mechanism and DVD servo board to-
gether.
1-22 (No.MB496)
Tray assembly
Double face tape
Fig.5
Traverse mechanism assembly DVD servo board
C
Fig.6
LED assembly
C