JVC UX-QD70S Service Manual page 19

3.1.22 Removing the key board
(See Fig.25)
• Remove the rear cover(B), side panels(L)/(R), top cover as-
sembly and front panel assembly.
(1) From the inside of the front panel assembly, remove the
five screws AB attaching the key board.
(2) Take out the key board from the front panel assembly.
3.1.23 Removing the headphone board
(See Fig.26)
• Remove the rear cover(B), side panels(L)/(R), top cover as-
sembly, heat sink(B), main board, regulator board, trans
board, joint board, CD mechanism bracket and DVD mecha-
nism assembly.
(1) From the top side of the main body, remove the screw AC
attaching the headphone board.
(2) Take out the headphone board from the main body.
Key board
Fig.25
AC
Headphone board
Fig.26
AB
(No.MB496)1-19