5.9.1 Programming Power Failure Recognition Time
1.
Press SET.
2.
Press RECOGNITION TIME.
3. Press POWER. The Model 1108 responds: "Enter minutes. "
4.
Using the number keys, enter the number of minutes. The
Model 1108 will recite the digits as they are pressed.
5. Press ENTER. The Model 1108 responds: "Enter seconds. "
6. Using the number keys, enter the number of seconds. The
Model 1108 will recite the digits as they are pressed.
7. Press ENTER. The Model 1108 responds: "OK. "
Chapter 5: Alarm Programming
79