Special Dialing To A Beeper Or - Sensaphone 1108 User Manual

5. Position the pound (#) or asterisk (*) within the telephone
number where required by pressing SET (where the pound is
located) or WHAT IS (where the asterisk is located). The
Model 1108 will "beep" each time pound or asterisk is
pressed.
6. Enter any remaining digits of the telephone number.
7. Press ENTER. The Model 1108 will say "Enter. "
4.4.4 Special Dialing to a Beeper or Pager
The following example demonstrates just one solution to
programming the Model 1108 for dialing to a beeper or pager.
Many other key sequences will also work. Start with steps 1–3
below; next, enter special dialing keys where required for your
beeper or pager service.
To incorporate a pound or asterisk:
1. Press SET.
2. Press PHONE NUMBER.
3. Press any unassigned number key (from 1 to 8) to represent
the new telephone number entry.
Chapter 4: Communications Programming
–OR–
47