Sensaphone 1108 User Manual page 126

Sensaphone ®
Parameter
Speaker Mute Turns off the speaker during
Input
Enable/Disable
Power Alarm Turns power alarm detection
Enable/Disable
Sound Alarm Turns high sound level alarm
Enable/Disable
Temperature Scale
Security Code
Callback
Acknowledgment Acknowledgment on or off
RING/TAD/PAUSE/AM
1) Used to enter a minus sign for negative temperature limits or temperature calibrations.
2) Used to program a 4 second pause into dialout phone numbers.
CODE/MUTE Key
Used to program a "wait for answer" into dialout phone numbers.
SET/# Key
Used to program a "#" into dialout phone numbers.
WHAT IS/* Key
Used to program an "*" into dialout phone numbers.
PROGRAMMING THE 1108 FOR USE WITH A PAGER
Press [SET/#] + [PHONE NUMBER] key + the phone number of the pager +
[RING/TAD/PAUSE/AM]
if required by your pager service) + [ENTER].
*NOTE: You may have to press the [PAUSE] key multiple
times to coordinate with the delay in your pager service's
answering function. We recommend you try pressing
[PAUSE] twice.
Enable/Disable Alert Inputs: [*] + [input #]
Enable/Disable High Sound Level: [*] + [9]
Enable/Disable AC Power: [*] + [0]
126
Model 1108 User's Manual
Description
alarm conditions
Turns input alarm
detection on or off
on or off
detection on or off
Selects between
Fahrenheit and Celsius
Prohibits programming
changes
Turns Callback
SPECIAL KEY FUNCTIONS:
*
+ the phone number of the 1108 (+ optional [SET/#]
REMOTE TOUCH-TONE COMMANDS
Key Sequence Response Default
[SENSOR ON/OFF]
+ [MUTE]
[SENSOR ON/OFF] +
[input#]
[SENSOR ON/OFF] +
[POWER]
[SENSOR ON/OFF] +
[SOUND]
[SENSOR ON/OFF] +
[F/C]
[SET] or [WHAT IS] +
[CODE]
+ [4 digit code]
[SENSOR ON/OFF] +
[PHONE]
Activate Listen-in: [#] + [1]
Activate Status Report: [#] + [2]
Disconnect: [#] + [#]
On or Off off
On or Off Enabled
On or Off Enabled
On or Off Enabled
On or Off Fahrenheit
(on)
none
On or Off off