Sensaphone 1108 User Manual page 48

Sensaphone ® Model 1108 User's Manual
4. Enter the complete telephone number using the number keys.
The Model 1108 will recite the digits as they are pressed.
5. Press CODE. This instructs the Model 1108 to wait for the
telephone call to be answered by the beeper or pager service.
(A voice message will not occur—only digital tones are used.)
Note that CODE may not work with beepers where there is no
ring before the beeper connects. If that proves to be the case
for your particular beeper, skip the CODE step and proceed
from Step 4 to Step 6.
6. Now press PAUSE once to activate a four second delay. This
assumes the call is answered by a beeper/pager service that
immediately delivers a prerecorded voice message. PAUSE
may be pressed more than once to program more time for the
beeper/pager service to finish its message. Each press of
PAUSE allocates four additional seconds. The Model 1108
will "beep" with each press.
7. Enter a telephone number or custom code number that will
identify the Model 1108 as the caller to your beeper or pager.
A code may consist of any number(s) you designate. Many
users find it convenient to use the telephone number to which
the Model 1108 is connected.
48