Switching The Output Over The Telephone - Sensaphone 1108 User Manual

Sensaphone ® Model 1108 User's Manual
To switch the output OFF from the keypad:
1. Press STATUS.
2. Press 3.
INTERCALL
TIME

8.2.2 Switching the Output over the Telephone

1. Call the Sensaphone. When the unit answers it will begin
reciting a status report. At any time during the call, press a
touch-tone. The unit will respond with "OK. " The Sensaphone
is now ready to accept touch-tone commands.
2. On your phone, press # 6 to turn ON the output. The
Sensaphone will respond "ON. "
3. Press # 3 to turn OFF the output. The Sensaphone will
respond "OFF. "
4. To check the present state of the relay press # 2.
This initiates a full recitation of the Status Report. At the
end of the status report, the Sensaphone will say, "Number
nine On/Off."
106
STATUS
CONFIGURE
3
+
+
+