Local Voice Mute; Enable/Disable Local Voice Mute; Voice Repetitions; Programming Voice Repetitions - Sensaphone 1108 User Manual

4.9 Local Voice Mute

When the Model 1108 dials out to report an alarm, it also audibly
recites the alarm message at its installation site. The Local Voice
Mute command allows you to turn off the voice at the Model
1108's site during alarm dialouts and status call-ins. This feature
is used to prevent intruders or unauthorized persons from hearing
the alarm dial-out message or from hearing the Status Report
during an off-site call.

4.9.1 Enable/Disable Local Voice Mute

To enable/disable Local Voice Mute:
1. Press SENSOR ON/OFF.
2. Press MUTE.
The Model 1108 will say "On" to indicate that Local Voice Mute
is enabled, or "Off" to indicate that it is disabled.
3. Repeat key sequence to switch between enabled or disabled
Local Voice Mute.

4.10 Voice Repetitions

The Voice Repetitions feature allows programming of the number
of times the alarm message is delivered per phone call during
alarm dial-out.
The maximum repetitions may be set to 10; the default is 3
repetitions.

4.10.1 Programming Voice Repetitions

To program Voice Repetitions:
1. Press SET.
Chapter 4: Communications Programming
57