Page 1
SENSAPHONE ® Model 1104/08 RemoteControl Addendum Your local RemoteControl dealer:...
Page 2
The Sensaphone 1104/08 RemoteControl also allows you to turn a device on or off using the 1104/08 keypad or using your touch-tone telephone. You can also inquire about the status of the device during a voice status report.
Page 3
TIME Switching the Output over the Telephone 1. Call the Sensaphone. When the unit answers it will begin reciting a status report. At any time during the call, press a touch-tone. The unit will respond with “OK. ” The Sensaphone is now ready to accept touch-tone commands.
Page 4
Sensaphone ® Model 1104/1108 User’s Manual 3. Press # 3 to turn OFF the output. The Sensaphone will respond “OFF. ” 4. To check the present state of the relay press # 2. This initiates a full recitation of the Status Report. At the end of the status report, the Sensaphone will say “Number five On/Off”...
Page 5
Controlling Lights or other devices with Sensaphone Using X10 technology, you can remotely activate any electrical device or appliance in your home through your Sensaphone. X10 technology is a suite of control modules that plug into your existing electrical outlets and transmit coded signals to lamps, lights, and appliances to turn them on or off (See Figure 2).