Configuration/Integration - Siemens Simatic RF600 System Manual
Hide thumbs
Also See for Simatic RF600:
- System manual (506 pages) ,
- Configuration manual (294 pages) ,
- Compact operating instructions (3 pages)
Table of Contents
Advertisement
The positions of the fixing holes for the device are shown in the section Dimension drawings
(Page 153).
5.4.4
Configuration/integration
An Ethernet interface is available for integrating the device into system
environments/networks. Over the Ethernet interface and with a direct connection to the PC,
the RF640R can be configured in two different ways:
● Using RF-MANAGER Basic V2
● Using a user application (XML commands)
The communication interface transfers the data over the RF-MANAGER Basic to the IT, ERP
and SCM systems as well as to SIMATIC controllers. Alternatively the data is transferred to
user applications by means of XML commands.
Simple process controls (e.g. signal lights) can be directly implemented using the write/read
device via two digital inputs and outputs.
Figure 5-20
Overview of configuration of the RF640R reader
SIMATIC RF600
System Manual, xx/2014, J31069-D0171-U001-A15-7618
Readers
5.4 RF640R reader
149
Advertisement
Table of Contents
