NETGEAR PS101 Installation Manual page 12

I can not print from my computer
• You may not have selected the correct printer in the
• You may not have configured the computer to work with the print server. Go through
procedure 4 on page 6 for each computer that will use the print server.
• The computer may not be communicating to the print server. To test for printing directly
from the print server:
1. Open a browser and go to the IP address for the print server. (For example, type
http://192.168.0.150 and click
Note: If you do not know the IP address, you use the NETGEAR Print Server
Administration program. Click Start. Point to Programs and click NETGEAR Print
Server>NETGEAR Print Server Administration. The Reference Manual on the
Resource CD has full instructions.
2. Click
Printer Ports
3. Click
Print Test Page
4. After the test page prints, click
5. Click
Yes
Could print previously but can no longer print from
my computer
• If the print server is set up to 'obtain IP address automatically', the IP address may have
changed. Restart your computer. You may also use the IP Setup program on the
administrative computer to assign a fixed IP address to the print server. Click
to and click
Programs
• The print server may be overheated. Unplug the power adapter and then plug it in again.
Remove any paper or other material that may be restricting ventilation. Lower the
temperature in the surrounding environment.
10
on the left.
.
(or ) if asked about closing the browser window.
OK
NETGEAR Print Server>IPSetup
Print
.)
Go
t.
Logou
.
dialog box.
. Point
Start