NETGEAR PS101 Installation Manual page 9

To configure computers running Windows NT, 2000, and XP:
1. Click , point to
Start
.
Wizard
2. Read, follow the instructions, and click
message window.
3. In the list, select the print server port with the printer
you want to add to this computer and click
you see the
AddPort
(such as PSFF0091_P1).
Printer port name:_____________________________.
4. Scroll down in
Server port with port name as written above.
Click .
Next
Note: Do NOT select the default port "LPT1."
5. Select the printer manufacturer on the left and
the model on the right
or, if you need to install the printer driver, click
and follow the instructions.
Have Disk
6. If you have installed the printer driver for this
printer, you will be asked to keep the existing
driver or replace it. Select either one and click
. Follow the instruction on screen if any.
Next
7. Type a name for this printer and determine whether you want this as the default printer.
Click .
Next
8. Select when asked about sharing the printer and click
No
Note: The print server will perform this function.
9. Select when asked about printing a test page and click
Yes
10. Click .
Finish
If you cannot print the test page, go to Troubleshooting on page 9.
If you successfully printed the test page, you can configure other computers to access this
printer by repeating procedure 4 on each computer.
Programs> NETGEAR Print Server
screen, write down the port name
screen. Select the Print
Add Printer Wizard
and click
in the
OK Setup
. When
Add
Next
NETGEAR Add Printer
.
.
Next
7