Toro WORKMAN GTX 07131 Operator's Manual page 16

Supervisor Speed-Limit Switch
The supervisor speed-limit switch, located under the seat
assembly, has 2 positions: P
Rotate the switch clockwise to the E
limit the maximum machine speed to 19 km/h (12 mph).
Rotate the switch counterclockwise to the P
position to restore the maximum speed of the machine to
26 km/h (16 mph) as shown in
1. Performance position
2. Economy position
Status-Indicator Light
The status-indicator light is located to the right of the
parking-brake lever on the control panel
When the machine is turned on, the green status-indicator
light illuminates either solid or blinking.
If the light is solid, this indicates that the machine is ready for
normal operation. If the light is blinking, there is an issue that
needs to be resolved before continuing with normal operation
of the machine.
If the status-indicator light blinks 2 times, this indicates
that the parking brake is engaged while in the F
R position on the direction selector. Disengage the
EVERSE
parking brake to shut off the status-indicator light.
Refer to Troubleshooting (page 44)
light blinks more than 2 times.
and E
ERFORMANCE CONOMY
position to
CONOMY
ERFORMANCE
Figure 9.
Figure 9
3. Supervisor speed-limit
switch
(Figure 6).
ORWARD
if the status-indicator
Passenger Handholds
The passenger handholds are located on the outside of each
. seat (Figure 10).
1. Passenger handhold
or
16
Figure 10
Passenger Side Shown