Maintenance; Recommended Maintenance Schedule(S) - Toro WORKMAN GTX 07131 Operator's Manual

Maintenance

Note: Download a copy of the electrical schematic by visiting www.Toro.com and searching for your machine from the
Manuals link.
Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 100 hours
Before each use or daily
Every 25 hours
Every 100 hours
Every 300 hours
Every 400 hours
Every 800 hours
Every 1,000 hours
Maintenance Procedure
• Perform the breaking in a new machine guidelines.
• Perform the pre-starting checks. Check the following items each time you begin
using the machine for the day:
• Check the tire pressure.
• Charge the batteries.
• Check the water level of the batteries.
• Check the brake-fluid level.
• Clean the batteries.
• Check the water level of the batteries and add distilled or deionized water to the
batteries (if necessary).
• Grease the bearings and bushings.
• Check the condition of the tires and rims.
• Torque the wheel-lug nuts.
• Check the front wheel toe-in.
• Check the transaxle-fluid level.
• Inspect the brakes.
• Grease the front wheel bearings.
• Replace the service and parking-brake pads.
• Change the transaxle fluid.
• Change the brake fluid.
26