Controls - Toro WORKMAN GTX 07131 Operator's Manual

Controls

1. Light switch
2. Hour meter
3. Battery-discharge indicator
4. Horn button (TC models only)
5. Gear-shift selector
6. Key switch
Accelerator Pedal
Use the accelerator pedal
the machine. Pressing down the accelerator pedal starts the
machine. Pressing the pedal farther increases ground speed.
Releasing the pedal slows the machine, and the machine shuts
off.
The maximum forward speed in performance mode is
26 km/h (16 mph) as shown in
The maximum forward speed in economy mode is 19 km/h
(12 mph) as shown in Figure
(Figure 6) to vary ground speed of
Figure 9.
9.
Figure 6
7. Parking-brake lever
8. Brake pedal
9. Accelerator pedal
10. USB power point
11. Status-indicator light
Brake Pedal
Use the brake pedal to stop or slow the machine
CAUTION
Operating a machine with worn or incorrectly
adjusted brakes can may result in personal injury.
If brake pedal travels to within 25 mm (1 inch) of
the machine floorboard, adjust or repair the brakes.
14
(Figure 6).