About Battery Replacement - Honeywell CN75 User Manual

5. Snap the new cover into place.
6. Tighten the screws to secure the I/O cover to the computer.

About Battery Replacement

When the battery in the computer has a low charge, replace it with a charged
battery.
You should always place the computer in Hibernate mode before removing the
battery. Hibernate mode places the computer in a low power state so that the
battery can be removed for a short period of time.
Note: When you remove a battery from the computer, Honeywell recommends that you
install a charged battery within one minute to maintain your network connections.
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell
battery may result in damage not covered by the warranty.
Ensure all components are dry prior to placing the battery in the computer.
Mating wet components may cause damage not covered by the warranty.
8 75 Series Mobile Computer User Guide