You use either Funk, Microsoft or Reliable Access Client (RAC) security to
implement your wireless security solution. Honeywell recommends using RAC
Before you set security, you need to enable the radio, set the date, and set the SSID
on your computer. To use 802.1x security, you need to load a root certificate on
your computer. To use transport layer security (TLS) with 802.1x security, you also
need to load a user certificate.
Load a Certificate
To use transport layer security (TLS) with 802.1x security, you need a unique client
certificate on the computer and a trusted root certificate authority (CA) certificate.
1. Tap Start > Settings > System > Enterprise Settings.
2. Select Communications > 802.11 Radio > Certificates.
3. Tap Import Certificates.
4. To import a certificate chain:
5. To import user and root certificates from a Microsoft IAS server:
How to Make Your Security Choice
The computer supports Funk security, Microsoft® security and Reliable Access
Client (RAC) security. The option you choose depends on your network security
needs. Honeywell recommends using RAC security.
LEAP (Funk security only)
a. Tap the Import PFX tab.
b. Next to the Select pfx to import field, tap <<<.
c. Find and select the root certificate.
d. If required, enter the Password of pfx.
e. Tap Import Certificate.
a. Tap Web Enrollment.
b. To log on to the server, enter the User, Password, and Server (IP Address).
c. Tap OK.
d. When you are prompted to load the root certificate, tap OK.
e. When the message box appears to let you know the certificate has been
added, tap OK.
Choose Funk security if you use the computer in a static environment that
requires a high level of security. Funk security provides CCX v4 compliance,
support for LEAP and TTLS, and configuration for up to four profiles. Funk
security is the default security setting on the computer.
75 Series Mobile Computer User Guide