About The Color-Coded Keys; Enter Characters On The Qwerty Keypad - Honeywell CN75 User Manual

About the Color-Coded Keys

Note: The QWERTY keypads on the CN75 and CN75e do not include a green key.
Use the orange
symbols, and functions printed on the keypad overlay. After you understand how to
use the color-coded keys and key sequences, you can access all of the additional
features printed on the keypad overlay.
Press the Green or Orange key twice to lock it. When the key is locked, the LED
turns on. Press the key once to unlock it.
The default setting for the Green/Orange keys is Press twice to lock. You can also
set the keys to Press once to lock if you do not want the Green/Orange keys to lock
after pressing them twice. The information in this section assumes that you are
using the default setting for the Green/Orange keys lock options.
To change the setting for the Green/Orange keys, go to Start > Settings > System >
Enterprise Settings > Device Settings > Keypad.

Enter Characters on the QWERTY Keypad

You need to use the orange modifier key
characters and functions on the QWERTY keypad.
To type a character:
•
To type a character or access a function on the overlay:
•
To only type characters or access functions on the overlay:
•
To type a single uppercase letter:
•
To type all uppercase letters:
•
75 Series Mobile Computer User Guide
• To set the brightness level for the keypad backlight depending on the
computer power source, select a setting from the Brightness (Battery power)
or the Brightness (External power) list.
• Tap OK.
key and the green
Press the key for that character.
Press and then press the key for the character or function.
Press to lock the orange modifier key to stay on, and then press the keys
for the characters or functions.
Press and then the letter key.
Press to turn on Caps Lock, and then press the letter keys.
key to access additional characters,
and the shift key to access all
17