Download  Print this page

Set The Battery Status Led Activity; About Battery Life And Conservation - Honeywell CN75 User Manual

75 series mobile computer with windows embedded handheld.
Hide thumbs


Set the Battery Status LED Activity

You can change the way the battery status LED indicates the current charge level.
When the computer is connected to external power (such as in a dock), by default,
the LED appears as either steady green when the battery is fully charged, or steady
red when the battery is not fully charged. You can set the LED to pulse green when
the battery charge level is between 60% and 95% charged.
LED State
Steady green
Pulsing green
Steady red
To modify the battery status LED setting:
1. Select Start > Settings > System > Enterprise Settings.
2. Select Device Settings > Power Management > Battery LED.
3. Choose either 2 charging states (default setting) or 3 charging states
4. Tap OK.

About Battery Life and Conservation

Batteries that are stored outside the computer for long periods of time slowly
discharge. Honeywell recommends storing the battery in a charger to maintain
battery performance.
When you want to:
Use the computer and the
Low Battery status icon
appears or the Battery
light comes on.
Stop using the computer
for 5 minutes or longer.
Store the computer for
more than a day.
2 Charging States (default)
Battery charge level is more than 95%.
Does not appear.
Battery charge level is less than 95%.
Do this to save battery power:
Connect the computer to an external power source or save your data,
press the Power button, and then select Hibernate. After the computer
turns off, remove the battery and insert a fully charged battery.
Make sure that the low battery icon is not on the screen and the Battery
LED is not on. Press the Power button and choose Suspend to
suspend the computer.
If you are storing the computer for a few days, like over the weekend,
install a fully charged battery or connect the computer to a power
If you are storing the computer for longer, remove and charge the
battery, and then store both the battery and computer in a cool
location. Do not place the charged battery in the computer, which runs
the battery down over time even when the computer is not in use.
If you store the battery for several months, recharge the battery to keep
it at peak performance.
75 Series Mobile Computer User Guide
3 Charging States
Battery charge level is more than 95%.
Battery charge level is between 60%
and 95%.
Battery charge level is less than 60%.


   Related Manuals for Honeywell CN75

This manual also for:

Cn75eCn75e niCn75 niCk75

Comments to this Manuals

Symbols: 0
Latest comments: