Honeywell CN75 User Manual page 105

3. Select Microsoft Security.
4. Tap Yes to save your settings and reboot the computer.
Configure WPA or WPA2 Enterprise (802.1x) Security with Microsoft Security
Before you set WPA-802.1x or WPA2-802.1x security with Microsoft Security, you
need to configure your authentication server and authenticators. To use TLS
protocol, you also need to load a user and root certificate. On your computer, you
need to enable the radio and set the date.
1. Start Enterprise Settings.
2. Select Communications > 802.11 Radio > Microsoft Security.
3. Enter the Network name (SSID).
4. For Infrastructure Mode, select Infrastructure.
5. For Network Authentication, select WPA or WPA2.
6. For 802.1x Authentication, select either TLS, or PEAP.
7. Select Hidden Network.
8. Tap OK. The User Logon dialog box appears.
9. If you selected PEAP:
10. If you selected TLS, enter a User Name and Domain.
11. Tap OK.
Enable WPA or WPA2 Personal (PSK) Security with Microsoft Security
Before you set WPA or WPA2 Personal (PSK) security with Microsoft Security, you
need to need to know the pre-shared key for your access point or passphrase for
your authenticator. On your computer, you need to enable the radio and set the
date.
1. Start Enterprise Settings
2. Select Communications > 802.11 Radio > Microsoft Security.
3. Enter the Network name (SSID).
4. For Infrastructure Mode, select Infrastructure.
5. For Association, select WPA-PSK or WPA2-PSK.
75 Series Mobile Computer User Guide
The computer reboots and starts with Microsoft Security as the Security
Choice.
The default encryption is TKIP for WPA or AES for WPA2.
a. Enter a User Name, Password, and Domain.
b. If you want to save the password for future authentication sessions, select
Save Password.
The default encryption is TKIP for WPA-PSK or AES for WPA-PSK.
93