Overview of This Appendix
ALARM Connector and Cable
®
PacketStar
PSAX 4500 Alarm Module User Guide, Issue 1
255-700-598
A
This information describes the pin locations and pin assignments on the
and
ALARM
STATUS/CONTROL
orderable cables used to connect the PSAX 4500 Alarm module to the facility
alarm and control systems.
Figure A-1 illustrates the pin locations of the 26-pin
PSAX 4500 Alarm module (model 45N79) faceplate.
Note:
The PSAX 4500 Alarm module
from the Alarm module
Pin 1
Pin 9
Figure A-1. ALARM Connector Pin Locations on the PSAX 4500 Alarm Module
A shielded 3.7-meter (12-foot) Lucent cable (Part Number 42-20N79004,
COMCODE 300164290) is available with a matching connector on one end
and a 16-pair twisted wire pigtail on the other end (see Figure A-2).
Figure A-2. ALARM Cable with 26-Pin Connector and Pigtail
Pin Configurations
connectors. It also includes information on two
ALARM
ALARM
connector is rotated 180°
connector.
ALARM
Pin 10
Pin 19
10
1
19
Pin 26
26
18
9
Pin 18
connector on the
Release 10.0.0
A-1