Equipment Configuration Window Commands; Equipment Configuration Window Field Descriptions - Lucent Technologies PacketStar User Manual

Chapter 3 Configuring and Controlling the Module Using the Console Interface
Using the Equipment Configuration Window
Table 3-3. Equipment Configuration Window Commands
Command
Update Display
Page Down
Page Up
Interface by Name
Go Back to Main Menu
Field Description
Table 3-4. Equipment Configuration Window Field Descriptions
Field Name
Slot Default: N/A
Range: 1–25, depends
on chassis type
Format: Numeric
Module Type Default: N/A
Range: N/A
Format: Predefined
Status Default: Unknown
Range: N/A
Format: Predefined
Unknown
Primary
Standby
Alarm Status Default: No Alarm
Range: N/A
Format: Predefined
®
PSAX 4500 Alarm Module User Guide, Issue 1
PacketStar
3-10
Refreshes the current status of the modules in the PSAX chassis.
Displays the second page of the Equipment Configuration win-
dow. This command toggles with Page Up.
Displays the first page of the Equipment Configuration window.
This command toggles with Page Down.
Displays the Interface Name Table window on which you can
view all the interface names in the PSAX system.
Redisplays the Console Interface Main Menu window.
The display-only fields on this window are described in Table 3-4.
Field Value
Displays the slot number in the PSAX chassis.
Displays the type of the module in the slot. When a
module is inserted into the chassis, its name is dis-
played in the Module Type field next to the slot num-
ber. When the module is removed from the chassis, its
name is no longer displayed in the Module Type field
and is replaced with None.
Displays the operational status of the module.
Indicates that the module has not been configured.
Indicates one of the following:
• at least one port or channel on an I/O module has
• a CPU module is functioning as the primary CPU
Indicates one of the following:
• a module in redundant systems is operating as the
• a CPU module in redundant systems is functioning
Displays the present alarm condition of the module.
For the alarm status conditions, see the table "Alarm
Status Descriptions for Modules" following this table.
Function
Description
been configured.
module.
standby (backup) module to the primary (active)
module.
as the standby (backup) CPU module.
Release 10.0.0
255-700-598