Alarm Module Configuration Window; Alarm Module Configuration Window Commands - Lucent Technologies PacketStar User Manual

Chapter 3 Configuring and Controlling the Module Using the Console Interface

Alarm Module Configuration Window

Figure 3-1. Alarm Module Configuration Window
Commands
Table 3-1. Alarm Module Configuration Window Commands
Command
Apply Alarm Configuration Applies the field values you set.
Reset Alarm Configuration
Go Back to Equipment
Configuration
Field Descriptions
®
PSAX 4500 Alarm Module User Guide, Issue 1
PacketStar
3-2
Table 3-1 lists the commands that are available on the Alarm Module Config-
uration window.
Sets the field values back to the last saved configuration.
Redisplays the Equipment Configuration window.
Table 3-2 describes the field names and field values for the Alarm Module
Configuration window.
Function
Release 10.0.0
255-700-598