Reliance electric GV3000/SE Hardware Reference, Installation, And Troubleshooting Manual page 63

Terminal
Number
22 Digital Input 3
(Reset)
23 Digital Input 2
(Stop)
24 Digital Input 1
(Start)
25 24 VDC Isolated Common
Wiring the Regulator Board Terminal Strip and the Output Relay Terminal Strip
Table 7.6 - Wiring Signal and Control I/O to the Regulator Board Terminal Strip (Continued)
Description
Wiring the Reset Input
Wiring the Stop/Start Inputs
Parameters/Wiring Connections
The following parameter must be set:
•
P.000: Control Source
Terminal 22 On = Reset
The following parameter must be set:
•
P.000: Control Source
•
P.025: Stop Type
Terminal 23 Off = Stop
Terminal 24 On Transition = Start
7-13