Terminal
Number
Description
12
Isolated Reference
Voltage (+10 VDC)
13
Analog Speed/Torque
Reference Input Voltage
(+/- 10 VDC)
14
Analog Speed/Torque
Reference Input Current
(0-20 mA)
15
Isolated Speed/Torque
Reference Common
(Voltage/Current)
7-8
Table 7.6 - Wiring Signal and Control I/O to the Regulator Board Terminal Strip (Continued)
Wiring Analog Speed Reference Inputs
Related parameters:
•
P.000: Control Source
•
P.009: Terminal Strip Analog Input Offset
•
P.010: Terminal Strip Analog Input Gain
•
P.011: Terminal Strip Analog Input Configure
Refer to the GV3000/SE Bookshelf Drive Software Start-Up
and Reference manual for additional parameter information.
Jumper J4 must also be set. See figure 2.7.
Refer to Appendix G of the GV3000/SE Bookshelf Drive
Software Start-Up and Reference manual for more
information about the analog input.
Parameters/Wiring Connections
GV3000/SE AC Bookshelf Drive Hardware Reference, Version 6.06