2.5
Cabinet Installation and Earth Grounding setup
Follow the following steps to setup TPC system, and please pay attention that
Ground pin of TPC system should be connected to earth ground. Under this circum-
stance, TPC system could have the best performance such as EMI immunity, ESD
immunity, Surge immunity and also system isolation. If the TPC system is embedded
in the cabinet, the TPC system's ground, cabinet's ground and earth ground should
be connected together.
1.
Install the TPC system into the cabinet.
Step A: Connect the cabinet to earth ground.
Step B: Embed null TPC system into the cabinet without any I/O cable and power.
2.
System wiring.
Step A: Connect the cabinet to earth ground.
Step B: Ensure that all cabinet has been grounded together.
Step C: Connect the ground of the power supply to the cabinet.
Step D: Connect the ground pin of TPC system to the cabinet.
TPC-5000 Series User Manual
14