Table of Contents
Advertisement
2.3
Driver Installation
2.3.1
Installation of Touch Screen driver
Windows 7, Windows 8 & Windows 10 has the built-in multi-touch driver to support.
2.3.2
Installation of Watchdog driver
Installation is required. If there is no existing installation of Advantech Watchdog
WDM driver on your computer, take the following steps to install Advantech Watch-
dog WDM driver.
How to install Advantech Watchdog WDM driver
1.
Verify that your computer meets the hardware and software requirements to run
Advantech Watchdog WDM driver.
For more information, see Environments.
2.
If you do not already have the installer of Advantech Watchdog WDM driver,
download it from Advantech official Web site.
3.
From Control Panel, remove any existing installation of Advantech Watchdog
WDM driver from your computer.
4.
With administrator-level privilege on your computer, run the installer of Advan-
tech Watchdog WDM driver.
Below is an example of Advantech Watchdog WDM driver Setup. If you want to stop
the setup, press the "Cancel" button in the setup program. The Setup program will
stop the procedure automatically.
1.
Run the Setup program.When the setup program is running, click the "Next >"
button in "Advantech Watchdog Driver Setup Wizard".
2.
The installation is running. Please wait for completion.
TPC-5000 Series User Manual
10
Advertisement
Table of Contents
