Table of Contents
Advertisement
16 www.electrolux.com
Symbol
If you set the time for a clock function, the
time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90 % of the set time.
The appliance uses the residual
heat to continue the cooking
process until the time ends (3 - 20
minutes).
Setting the clock functions
1.
Set a heating function.
2.
Press
display shows the necessary clock
function and the related symbol.
3.
Press
time. Press OK to confirm. When the
time ends, an acoustic signal sounds.
The appliance deactivates. The dis-
play shows a message.
4.
Press a sensor field to stop the signal.
Useful information:
• With Duration and End Time you must
set the heating function and the tem-
perature first. Then you can set the
clock function. The appliance deacti-
vates automatically.
• You can use Duration and End Time at
the same time, if you want to automati-
cally activate and deactivate the appli-
ance on a given time later.
• When you use the Core Temperature
Sensor (if applicable), the Duration and
End Time functions do not work.
7.1 Heat + Hold
The Heat + Hold function keeps prepared
food warm at 80 °C for 30 minutes. It ac-
Function
To set the switch-off time for a heating function
End Time
(max. 23 h 59 min).
again and again until the
or
to set the necessary
Description
tivates after the baking or roasting proce-
dure ends.
• You can activate or deactivate the func-
tion in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more than 80
°C.
– The function Duration is set.
Activating the function
1.
Activate the appliance.
2.
Select the heating function.
3.
Set the temperature above 80 °C.
4.
Press
again and again until the
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic sig-
nal sounds.
The Heat + Hold function stays on if you
change the heating functions.
7.2 Extra Time
The Extra Time makes the heating func-
tion continue after the Duration ends.
• Applicable for all heating functions with
Duration or Weight Automatic .
• Not applicable for heating functions
with the core temperature sensor.
Activating the function:
1.
When the cooking time ends, an
acoustic signal sounds. Press a sen-
sor field.
2.
The display shows the message for
Extra Time for five minutes.
3.
Press
to activate (or
4.
Set the Extra Time period. Press OK
to confirm.
to cancel).
Advertisement
Table of Contents
