Advertisement
to the main menu.
Sound Sensitivity
Press the MENU and use the DOWN and UP buttons to select
and select the sound sensitivity between value 0 and 100.
Press the ENTER button for confirmation after value selection. To go
back to the functions without any changes press the MENU button
again.
Led Display
Press the MENU button to select
and the display will blink. Use the DOWN and UP buttons to select
the
(Led display on) or
the mode has been selected, press the ENTER button to confirm. To
go back to the functions without any changes press the MENU
button again. Press and hold the MENU button for one second or
wait for one minute to go back to the main menu.
Display Inversion
Press the MENU button to select
change the mode
(display normal), it will be automatically
saved after 8 seconds. Press the ENTER button again to select the
mode
(display inversion). To go back to the functions press
the MENU button. Press and hold the MENU button for one second or
wait for one minute to go back to the main menu.
Display normal mode is for floor standing the unit.
Display inversion mode is for hanging the unit upside down.
Pan Inversion
Press the MENU button to select
. Press the ENTER button
(Led display off) mode. Once
. Press the ENTER button to
. Press the ENTER button
and the display will blink. Use the DOWN and UP buttons to select the
(normal) or
(pan inversion) mode. Once the mode has
been selected, press the ENTER button to confirm. To go back to the
functions without any changes press the MENU button again. Press and
hold the MENU button for one second or wait for one minute to go back
to the main menu.
Tilt Inversion
Press the MENU button to select
the display will blink. Use the DOWN and UP buttons to select the
(normal) or
(tilt inversion) mode. Once the mode has
been selected, press the ENTER button to confirm. To go back to the
functions without any change press the MENU button again. Press and
hold the MENU button for one second or wait for one minute to go back
to the main menu.
Auto-Test
Press the MENU button to select
unit will run a self-test with its built-in programs. To go back to the
functions without any changes press the MENU button again. Press and
hold the MENU button for one second or wait for one minute to go back
to the main menu.
Fixture hours
Press the MENU button up to where
Press the ENTER button and the display will show the number of working
hours of the unit. To go back to the functions press the MENU button.
Software version
Press the MENU button up to where
. Press the ENTER button and
. Press the ENTER button and the
is blinking on the display.
is blinking on the display.
Advertisement
