Prolight TRANSCENSION DMX OPERATOR 2 User Manual

I. PRODUCT DESCRIPTIONS
Thank you for using our company the 192 CH DMX OPERATOR. To optimize the
performance of this product, please read these operating instructions carefully to
familiarize yourself with the basic operations of this unit. The unit is a unique 192
DMX channel. This unit has been tested at the factory before being shipped to you,
there is no assembly required. It features include:
l 192 DMX channels
l 12 Scanners of 16 channels each
l 30 Banks of 8 programmable scenes
l 6 Programmable chases of 240 scenes
l
8 Sliders for manual control of channels
l Assignable joystick for ease of channels
l File Dump allows data to be sent or received between two units
l Auto mode program controlled by speed and fade time sliders
l Fade time/Assign fade time
l Reversible DMX channels allows fixture to react in opposition to others
in a chase
l 8 CHANNEL or 16 CHANNEL mode
l Fine adjustment for joystick pan and tilt
l Blackout master button
l Manual Override button allows you to grab any fixture on the fly
l Built in microphone for music triggering
l DMX Polarity selector
l Power failure memory
Read the instruction in this manual carefully and thoroughly, as they give important
information regarding safety during use and maintenance. Please keep this manual
with the unit, in order to consult it in the future.
II． WARNINGS
1. To prevent or reduce the risk of electrical shock or fire, do not expose this unit
to rain or moisture.
2. Clearing memory often may cause damage to the memory chip, be careful not to
initialize your unit frequency often to avoid this risk.
3. Only use the recommended AC/DC power adaptor.
TRANSCENSION DMX OPERATOR 2 USER MANUAL
4. Be sure to save the packing carton in case you may ever have to return the unit
for service.
5. Do not spill other liquids or water in to or on to your amplifier.
6. Be sure that the local power outlet match that or the required voltage for your
amplifier.
7. Do not attempt to operate this unit if the power cord has been frayed or broken.
Please route your power cord out of the way of foot traffic.
8. Do not attempt to remove or break off the ground prong from the electrical cord.
This prong is used to reduce the risk of electrical shock and fire in case of an
internal short.
9. Disconnect from main power before making any type of connection.
10. Do not remove the top cover under any conditions. There are no user serviceable
parts inside.
11. Disconnect the unit's main power when left unused for long periods of time.
12. This unit is not intended for home use.
13. Carefully inspect this unit for damage that may have incurred during shipping. If
the unit appears to be damaged, do not attempt any operation, please contact
your dealer.
14. This unit should be operated by adults only, never allow small children tamper
or play with this unit.
15. Never operate this unit under the following conditions:
- In places subject to excessive humidity
- In places subject to excessive vibration or bumps
- In area with a temperature over 45
III. CAUTIONS
1. There are no user serviceable parts inside this unit.
2. Do not attempt any repairs yourself, doing so will void your manufactures
warranty.
3. In the unlikely event your unit may require service please contact your nearest
dealer.
IV． CONTROLS AND FUNCTIONS
0 0 0 0
C/113 F or less than 2 C/35.6 F