Advertisement
1.
Safety Instruction
Please read the instructions carefully as they include
important information about installation, usage and
WARNING
maintenance.
P lease keep this User Guide for future consultation. If you sell the
unit to another user be sure that they also receive this.
Unpack and check carefully that there is no transportation damage
before using the unit.
Ÿ Before operating, ensure that the voltage and frequency of the
power supply match the power requirements of the unit.
Ÿ It's important to ground the yellow/green conductor to earth in
order to avoid electric shock.
Ÿ The unit is for indoor use only. Use only in a dry location.
Ÿ The unit must be installed in a location with adequate ventilation,
at least 50cm from adjacent surfaces. Be sure that no ventilation
slots are blocked.
Ÿ Disconnect the mains power before replacement or servicing.
Ÿ Make sure there are no flammable materials close to the unit while
operating as they may cause a fire hazard.
Ÿ Always use a safety cable when installing this unit. Do not carry
the unit with its head only; always carry it using the base.
Ÿ The maximum ambient temperature is: 40°. Don't operate it
where the temperature is higher than this.
Ÿ In the event of a serious operating problem stop using the unit
immediately. Never try to repair the unit by yourself. Repairs
carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center.
Always use the same type spare parts.
Ÿ Do not touch any power cables during operation as the high voltage
may cause an electric shock.
Warning
Ÿ To prevent or reduce the risk of electrical shock or fire, do not expose
the unit to rain or moisture.
Do not open the unit within five minutes after switching off.
Ÿ The housing and lenses must be replaced if they are visibly damaged.
Ÿ This lighting fixture is for professional use only - it is not designed for
or suitable for household use. The product must be installed by a
qualified technician in accordance with local territory regulations. The
safety of the installation is the responsibility of the installer. The
fixture presents risks of severe injury or death due to fire hazards,
electric shock and falls.
Ÿ Warning! Risk Group 2 LED product according to EN 62471. Do not
view the light output with optical instruments or any device that may
concentrate the beam.
Ÿ WARRANTY: One year from date of purchase.
Installation
The unit should be mounted via its screw holes onto the bracket.
Always ensure that the unit is firmly fixed to avoid vibration and
slipping while operating. Make sure that the structure to which you are
attaching the unit to is secure and is able to support a weight of 10
times of the unit's weight. Always use a safety cable that can hold 12
times of the weight of the unit when installing the fixture.
The equipment must be installed by professionals and it must be
installed in a place where is out of the reach of people and no one can
pass by or under it.
Advertisement
