Advertisement
2. Features & Technical Specifications
Control: Sound active, Auto, Master/slave and DMX-512 modes
DMX Channels: 1CH/8CH/10CH
Gobos/colours: 7 Gobos /colours+ open/white
Electronic dimming: 0-100%
3. How To Set The Unit
3.1 Control panel & Display
Display
Shows the various menus and selected functions
Button
MENU
Selects the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
Confirms the selected functions
Mains input
Connection to the power supply.
DMX input/output
For DMX 512 linking. Use a 3-pin XLR cable to link to the controller or to
other units.
Voltage:
Fuse:
Power consumption:
Light source:
Dimension:
Weight:
Pan/Tilt:
Power sockets:
XLR sockets:
3.2 Main Functions
To select any of the given functions, press the MENU button up to
where the required function is showing on the display. Select the
function by pressing the ENTER button and the display will blink. Use
the DOWN and UP buttons to change the mode. Once the required
mode has been selected, press the ENTER button to confirm. To go
back to the functions without any changes, press the MENU button
again. Press and hold the MENU button for one second or wait for one
minute to go back to the main menu.
The main functions are as below:
ADDR
CHND
Menu
SLND
SPEED
100V~240V, 50/60Hz
T2.5A
61W
1 x 30W white LED
310 x 140 x 175mm
2.8 kg
166°/54°
IEC POWER INPUT/OUTPUT
3-pin XLR INPUT/OUTPUT
001-512
1CH/8CH/10CH
MAST
SL1
SL2
SLOW
NORL
Advertisement
